SHARP - Monocrystalline silicon photovoltaic modules

Product features

  • High-performance photovoltaic modules made of monocrystalline (156.5 mm) 2 silicon solar cells with module efficiencies of up to 14.1%.
  • Bypass diodes which minimise the loss in output when shading occurs.
    Textured cell surface for particularly high electricity yields.
  • BSF structure (Back Surface Field) to optimise cell efficiency.
  • Use of tempered white glass, EVA plastic, and weather protection film, as well as an anodised aluminium frame with drainage holes for long-term use.
  • Output: connection cable with waterproof plug connector.

Quality from Sharp

Benchmarks are set by the quality standards of Sharp Solar. Continual checks guarantee a consistently high level of quality. Every module undergoes visual, mechanical, and electrical inspection. This is recognisable by means of the original Sharp label, the serial number, and the Sharp warranty:

  • 2 year product guarantee
  • 10 year performance guarantee for a power output of 90%
  • 20 year performance guarantee for a power output of 80%

The detailed guarantee conditions and additional information can be found at www.sharp.eu.

Innovations from a photovoltaic pioneer

As a solar specialist with 50 years' experience in photovoltaics (PV), Sharp makes significant contributions to groundbreaking progress in solar technology.

Sharp photovoltaic modules in the NU series are designed for applications with high power requirements. These quality monocrystalline modules produce a continuous, reliable yield, even under demanding operational conditions.

All Sharp NU series modules offer system integration which is optimal both technically and economically, and are suitable for installations in on and off-grid PV systems.

Brief details for the installer

  • 156.5 mm x 156.5 mm monocrystalline solar cells
  • 48 cells in series
  • 2,400 N/m2
  • mechanical load-bearing capacity (245 kg/m2
    )
  • 1,000 V DC maximum system voltage

  • CE-compliant for your safety

Say YES to solar power! Because it protects the climate.

Mechanical data
Cell Monocrystalline (156.5 mm)2 Sharp silicon solar cells
Quantity and wiring of cells 48 in series
Dimensions 1,318 x 994 x 46 mm (1.31 m2)
Weight 16 kg
Connection type Cable with plug connector (MC-3)

 

Limit values
Operating temperature (cell) – 40 to +90 °C
Storage temperature – 40 to +90 °C
Maximum system voltage 1,000 V DC
Maximum mechanical load 2,400 N/m2
Over-current Protection 15 A

 

Electrical data
Made in EU
Made in Japan		   NU-185(E1)
NU-SS (E3E)		 NU-180 (E1)
NU-S0 (E3E)
NU-R5 (E3Z)
NU-R0 (E3E)		  
Maximum power Pmax 185 Wp 180 Wp 175 Wp 170 Wp  
Open-circuit voltage Voc 30.2 30.0 29.8 29.4 V
Short-circuit current Isc 8.54 8.37 8.29 8.37 A
Voltage at point of maximum power Vmpp 24.0 23.7 23.2 22.4 V
Current at point of maximum power Impp 7.71 7.6 7.55 7.60 A
Module efficiency m 14.1 13.7 13.4 13.0 %
NOCT   47.5 47.5 47.5 47.5 °C
Temperature coefficient – open-circuit voltage alpha Voc – 104 – 104 – 104 – 104 mV / °C
Temperature coefficient – short-circuit voltage lsc +0.053 +0.053 +0.053 +0.053 %/ °C
Temperature coefficient – power Pmax – 0.485 – 0.485 – 0.485 – 0.485 %/ °C
The electrical data applies under standard test conditions (STCs): irradiation 1,000 W/m2 with light spectrum AM 1.5 and a cell temperature of 25 °C. The rated electrical characteristics are subject to a manufacturing tolerance of – 5%/ +10%. NOCT conditions: irradiation of 800 W/m2, ambient temperature of 20 °C and wind speed of 1 m/sec. The modules manufactured in Europe and Japan are identical in construction.

 
 
eDinamix